Smoant Battlestar Baby Vape Pod System Kit Review

We start off today’s broadcast with all the most recent news from Smoant. They made a decision to set off in pursuit of compactness, and create an opponent towards the dredge nano. In any situation, the public just called this new thing. Let’s get acquainted, or else we completely forgot the AIO section.

Smoant Battlestar Baby Pod System Kit 
Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...
Dimensions: 72 x 45 x 15mm
Weight: 78g Case
material: metal + plastic
Power: built-in 750mAh
Chipset: ANT SMART CHIP
Cartridge capacity: 2.0ml
Evaporator resistance: 0.6 / 1.5Ω
Output power: 10 / 15W
Mode Works: POWER
Protection:from low / high resistance, from overheating, from short circuit, from overcharging / overdischarge
Connector type: magnetic
Screen / diagonal: no
Micro-USB port / charging: yes, Type-C, charging current 0.8A
Color: see photo below
Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...
Options
– Battlestar Baby mod
– replaceable cartridge (pre-installed)
– replaceable evaporators 2pcs 0.6 / 1.5Ω (one pre-installed)
– USB Type-C cable, but same lanyard
– user manual
– warranty card
Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...

The exterior of our visitor is very nice. As a design, a number of components at once – this is a odd form – almost square, and multi-colored designs on the sidewall. In addition, the manufacturer promises the actual existence of a special covering “CPR technology”, which does not gather fingerprints. Probably, the dimensions should be known as the greatest “advantage” from the novelty – it’s a really small “box”, with this particular you can count on stealth.

Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...

One of the releases, which anyway has not yet occurred, the developers have ready six variations. However, tend not to rush to rejoice – you will not locate classically relaxed one of them.

Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...

The ink cartridge is fixed having a magnet, its capacity is medium-sized, and also the airflow is unregulated. Tracking the liquid degree inside will never function.

Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...

Refuel, anyway, it will be on the side, but also for this procedure, it will have to be taken off the unit. There are two kinds of replaceable evaporators – they are designed for drinks having a substantial article of pure nicotine, which includes saline. Probably, the higher resistance is carried out on the grid, but this is just a guess …

Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...

The main entire body accommodates a good interior battery with great ability. Moreover, it will not charge for so long – about one hour. The causal Sort-C connector settled at the bottom in the gadget. For “visualization” of procedures taking place with AIO, there is a small dot of the Guided sign.

Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...

You will find no buttons on our bodies in the gadget – it really is triggered by tightening. The output voltage adjustments automatically – based on the level of resistance in the installed coil. But you will find a loop for your lanyard, and that he himself is in the container. By just how it is also a cable tv for charging you.

Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...

Price $29.9.

Smoant Battlestar Baby Pod System Kit - a serious competitor to Drag Nano ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Smoant Battlestar Baby Vape Pod System Kit
Hot Sale Recommendation:

Smok Novo 2 Pod System Kit

OBS Land Vape Pod System Kit

Voopoo Vinci R Mod Pod Kit

Smok RPM40 Vape Pod System Kit

Rincoe Tix Vape Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Vaptio ET AUTO Vape Pod System Kit Review

We keep on the style from the now well-liked AIO packages. This time, Vaptio excelled. Not so long in the past, they presented their new set, incidentally, inspired by the theme of superheroes. So our novelty resembles either a spaceship or a sports car. In brief, type it yourself – even designers, apparently, did not make a decision on the dock from the end.

Vaptio ET Auto Kit

Vaptio ET Auto Kit - Space Sports Car ...
Dimensions: 74.5 x 47 x 16mm
Weight: unknown
Case material: plastic
Power: built-in 550mAh
Cartridge capacity: 1.5ml
Evaporator resistance: 1.5Ω
Output power: 12W
Voltage range: 3.2 – 4.2V
Operating mode: POWER
Protection: from low / high resistance, from overheating, from short circuit, from overcharging / overdischarge
Micro-USB port / charging: yes, charging current 0.5A
Color: see photo below
Vaptio ET Auto Kit - Space Sports Car ...
Options
– ET Auto Kit mod
– USB cable
– user manual
– warranty card
Vaptio ET Auto Kit - Space Sports Car ...

This our hero, really the contrary compared to the previous one particular, is rejected in most cases. For the reason unidentified for me, the alien’s head flaunts within the very centre from the gadget – this is how we imagine them from someone’s “vile” filing. In basic, the exterior will not be bad, and exactly how many have statements within this segment when choosing …

Vaptio ET Auto Kit - Space Sports Car ...

And here the developers had been too distant – they offered seven at the same time! design choices. This is not really cthulhu for you personally with its standard two colors.

Vaptio ET Auto Kit - Space Sports Car ...

Little capability container, relaxing on a magnetic connector. It is refueled from below – everything is regular.

Vaptio ET Auto Kit - Space Sports Car ...

The built-in evaporator is again on porcelain. Moreover, it was made “within the type of” honeikomb, evidently, in the Middle Kingdom, a herb for the production of just this kind of coils was opened, because this is not the initial maker who features this type of advancement.

Vaptio ET Auto Kit - Space Sports Car ...

The primary body is full of the built-in electric battery of medium-sized capacity, which will have to be billed a little over 60 minutes. Micro-USB connector found at the bottom of the product.

Vaptio ET Auto Kit - Space Sports Car ...

You will find no management switches around the AIO it is activated by tightening. But there is a Guided indicator, even signs, like the stop impulses of the actual sports car – authentic, isn’t it?

Vaptio ET Auto Kit - Space Sports Car ...

This, in concept, is all that may be told about this new product.Yes, you’re proper – practically nothing impressive …

Vaptio ET Auto Kit - Space Sports Car ...

The purchase price is $34.99.

Vaptio ET Auto Kit - Space Sports Car ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Vaptio ET AUTO Vape Pod System Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Smok Novo 2 Pod System Kit

Smok RPM40 Vape Pod System Kit

Voopoo Drag Nano Kit

Veiik Airo Vape Pod System Kit- Limited Edition

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Augvape Vtec 1.8 Box Mod Review

Augvape Launches VTEC v1.8 Box Mod. The updated box mod received a varivolt mode, a sealed control panel, as well as a leather insert.

On August 14, Augvape introduced the VTEC v1.8 Box Mod , a direct descendant of the notorious V200, on their Facebook page . The new box mod has not undergone significant external changes, however, has acquired several modifications. They did not change the original style and depicted the zinc casing in the form of a smaller Honda Civic engine. The range of colors varied with a blue variation, apparently, it replaced the white one. A narrow control panel with an integrated ignition button, a monochrome display and a USB port stretched along the facade. The rotating arm was provided with a hermetic coating. The back side was decorated with a leather insert. Bottom fixed reinforced hinged cover.

The output power can be adjusted over a wide range from 5 to 200 watts. In addition, a varivolt, bypass and a proprietary mode – V-mode are available, which positively affects the speed and performance of the device. Work is provided by a pair of 18650 format batteries, charging should be carried out through a USB port with a current of 1.2A. Supported resistance can vary from 0.05 to 3.0 ohms.

The box mod comes with a USB cable and instructions.

Main characteristics:

  • Size – 87.5 by 45 by 29.2 mm
  • Food – 2×18650
  • 1.2A charging
  • Power from 5 to 200 watts
  • Voltage from 0.5 to 7.2 volts
  • Resistance 0.05 to 3.0 ohms

Features:

Ergonomic shape and finest leather strip

Constructed of high-quality zinc alloy

Powered by dual 18650 cells with 200W max output

Available in 4 work modes for your options

510 connection & Rotary switch(oriented on tanks

OLED screen shows the accurate battery status

Three colors available for your selections

Package Included:

1 x Augvape Vtec 1.8 Mod

1 x USB Charging Cable

1 x Warranty Card

1 x User Manual

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Augvape Vtec 1.8 Box Mod
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Veiik Airo Vape Pod System Kit- Limited Edition

Smok RPM40 Vape Pod System Kit

Voopoo Drag Nano Kit

Eleaf Rotor Sub ohm Tank

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Vapefly Brunhilde Top Coiler RTA Review

Vapefly launches Brunhilde Top Coiler RTA tank. The device received an 8 ml bottom tank and a two-post base with two spirals.

Vapefly unveiled the Brunhilde Top Coiler RTA on their Facebook page  . The new tank was given an impressive height of 65.5 mm and a rather non-standard design – the liquid tank was located at the bottom and was equipped with four absorbing channels made of high-quality German steel, supplying liquid to the evaporation chamber. To protect the flask, a decorated frame was provided. The dome was assembled from a cylindrical skirt with a pair of groups of small air inlets and a rotating topkep, supplemented by radiator ribs. At the very top, the 810th drip from a bright epoxy was set.

The center of the deck is divided into floors by a rectangular structure, including racks for horizontal fixation of a pair of spirals and two curved surfaces with a set of air holes creating volumetric blowing of the winding. The volume of the tank is 8 ml; a hole is provided for quick refueling on the side of the dome.

The delivery set includes two spirals, an adapter, a spare glass, cotton, a screwdriver, a set of spare parts and instructions.

Main characteristics:

  • Height – 65.5 mm
  • Diameter – 25.2 mm
  • Two spirals
  • Adjustable airflow
  • Tank volume – 8 ml

Features Of Vapefly Brunbible Top Coiler RTA 8ml

Features:

Surrounding Airflow System for Superior Flavor and Clouds

Easy Dual Coils Building Deck Offers Best Coil Position

Side Refilling Port Makes Refilling Convenient and Efficient

Innovatively Continuous and Automatic Stainless Steel Wire E-juice Replenishment System

8ml Maximum Juice Capacity Ensures You Ample Vaping Fun

Features Of Vapefly Brunbible Top Coiler RTA 8ml

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Vapefly Brunhilde Top Coiler RTA
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Vladdin Eden Vape Pod System Kit

Eleaf Rotor Sub ohm Tank

Veiik Airo Vape Pod System Kit- Limited Edition

Smok Novo 2 Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Eleaf Rotor Sub ohm Tank Review

Right here recently, our typical viewers have been considering – they are saying, could it be really that this style for non-solutions has sent back.Perhaps today’s guests could be the solution to your issue – she did not disappear anywhere at all.As you will notice later on, designers even deliver innovations towards the segment.So, additional we are going to talk about a new item for outdated-timers – the company Eleaf, which saw the lighting a few days ago.

Eleaf Rotor Sub Ohm Tank

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Housing substance: stainless metal

Atomizer type: maintenance-free of charge

Evaporators: 0.15 / .2Ω

Ability: 2 / 5.5ml

Diameter: 26mm getting / 28mm on bubble glass

Size: 56mm with drip suggestion

Connector: 510, pin gilded Excess

weight: 66g

Shade: see photograph under

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Options

– Rotor Sub Ohm Reservoir

– replaceable evaporators 2pcs .15 / .2Ω (one pre-set up)

– extra origins

– extra silicone plug

– spare window

– consumer guide

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Our visitor appearance regular, you will see no difference between him along with other brothers in the collection so simple.I did not observe any outstanding characteristics, nibbling the scuff marks in the lid.The measurements are not small – in both elevation and then in thickness, a decent tank.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Colour scheme is not as different as usual, but there are plenty to choose from.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

The drip type 810 is made from plastic, it is situated inside the cover with a child locking mechanism.The starting button is extremely a lot issued from the body.The pit for refueling is regular, the seal is installed slotted kind.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

The capability is little, however the full money window will significantly increase it.Moreover, there are 2 variations of the reservoir – nonetheless, of them with European limitations – you will not locate a magnifying window in it.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Nicely, and move on to the most important event.There are two types of replacement evaporators.We are certainly not interested in the least opposition – the spotlight from the plan is just the second instance.As you will notice, a propeller is built inside of, which is driven by a move.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Based on the developers, this has a good impact on the flavor move, as well as provides speedback safety – security against splashes.Well, what exactly is it – it is actually only necessary to consider, to unfoundedly compliments or even to cherish rather hasty.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

The airflow realignment was carried out in a completely familiar way – a swivel engagement ring on the bottom, massive atmosphere inlets, there are dangers.Probably, this backup will still be felled frantically – a minimum of hints of this are adequate.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Pin is operating decently.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Value $ 35.99

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Eleaf Rotor Sub ohm Tank
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Innokin Adept Starter Kit

Eleaf Rotor Sub ohm Tank

Voopoo Drag Nano Kit

Innokin Jem Vape Pen AIO Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

VEIIK Airo Pod Starter Kit Review

In the past, men from Smokjoy didn’t take a look at our light.Right we even started to overlook them.However, they did not drink herbal tea, although conducting completely meaningless conversations.On the contrary, they obtained will in to a fist, switched on the brains, and provided a new device.According to your extended traditions, the novelty is a brilliant representative of the AIO segment.

VEEK Airo Pod System Kit - a strict start ...

Dimensions: 100.5 x 25.5 x 12.5mm

Weight: unknown

Situation materials: zinc alloy + plastic

Energy: built-in 360 mAh

Container capacity: 2 ml

Evaporator resistance: 1.2Ω

Working function: POWER

Protection: from lower / substantial level of resistance, from overheating, from brief circuit, from overcharging / overdischarge

Connector kind: magnetic

Screen / diagonal: no

Micro-USB slot / charging you: yes, charging current unknown

Shade: see picture below

Vape Wholesale Supply,Vape Wholesale China – AVE40

Bundle

contents – Airo Pod System Kit

– replaceable 2pcs cartridge (the first is preinstalled)

– 2pcs silicone plug

– USB cable

– end user handbook

– guarantee greeting card

VEEK Airo Pod System Kit - a strict start ...

The exterior of our guests is pretty decent.The decor is almost not vulgar, and also the put in the sidewall under the skin here seems to be both to the community and also to the metropolis.

VEEK Airo Pod System Kit - a strict start ...

The form element is the most common – elongated and flattened vape adhere.Dimensions usually are not the smallest, to help you hardly cover such a device inside your palm.

VEEK Airo Pod System Kit - a strict start ...

From the beginning, the developers offer you five colour options – not bad, and quite uncommon types are found among them.

VEEK Airo Pod System Kit - a strict start ...

Replaceable ink cartridge normal ability, the resistance in the built-in evaporator is additionally inside the industry average.It should come out well.

VEEK Airo Pod System Kit - a strict start ...

It is set by way of a magnetic connector, and this will be refilled through the area – just eliminate the silicone plug.By just how, the producer carefully position the spare in the container, wasn’t it safer to just make it not removable from your cartridge.

VEEK Airo Pod System Kit - a strict start ...

The key physique has a built-in battery quite tiny for this kind of dimensions of capacity.True, we have been told about only a crazy charging present.Connector for such reasons, the programmers had been exiled towards the finish from the gadget.

VEEK Airo Pod System Kit - a strict start ...

Fireplace switches are certainly not here – the device is triggered by tightening.But in the bottom you can see a big LED sign.Perhaps there exists nothing much more to add.

VEEK Airo Pod System Kit - a strict start ...

Cost $ 25.99

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: VEIIK Airo Pod Starter Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Vladdin Eden Vape Pod System Kit

Veiik Airo Vape Pod System Kit- Limited Edition

Voopoo Drag Nano Kit

Smok Novo 2 Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

GeekVape Zeus X RTA Review

GeekVape introduced to the market Zeus X RTAThe novelty is designed for two windings, has an upper air intake, but the lower side blowing of the spirals. In general, the chip of the atom is a double evaporation chamber, the implementation of which, apparently, was strongly reflected in the taste, which is perfectly revealed here.

vidnabak

Equipment

The Sample box has flown to us for review, so the device will go to the final consumer in a different package, since we, for example, did not have a manual. The set has a spare flat Pyrex glass for 3.5 ml, 810 Ultem drip tip, a bag with a cotton fleece in the form of laces and 2 prewound spirals, a ZIP package, where there are a lot of multi-colored o-rings – only 14 pieces, 8 spare screws, of which 4 under the slot and 4 under the Phillips screwdriver, adapter for 510 drip-types, L-shaped key with hexagonal screws, T-shaped screwdriver and the Zeus X tank itself.

vnabore

vidpaketa

naborcik

Information for information

GeekVape Zeus X RTA is made of stainless steel and is presented in 6 colors, comes with two glass options – Bubble Glass is pre-installed at 4.5 ml and straight at 3.5 ml, has top air supply, with the ability to adjust the throttle using a ring, but lateral blowing two spirals through a special dome, while coil blown from the bottom.

Vape Wholesale Supply,Vape Wholesale China – AVE40

cveta

Dimensions:

Height: 47.8 mm (with a drip tip) 
Diameter: 25 mm 
Volume: 3.5 ml / 4.5 ml

vidvruke

Tank overview

Top mounted drip tip low pro, made of dolrin. It has an unusual, let’s say, design, but is good to use. In general, the hero of the review looks very nice in conjunction with GeekVape Aegig mini .

vidnamode

Inside the drip-type is smoothed under the cone, so the drops of condensate will not be collected from above, but immediately flow down.

The second yellow tipka from ultema also has a narrowing towards the center and is pleasant to use.

vidnadrip

Next comes the top cover for refueling atomaizer. It has no threads and previously stood in Zeus RTA and Zeus Dual RTA . Very convenient and fast, just press on top of the top-cap and scroll half a turn and unscrew it. The upper filling has recessed holes that will not allow the liquid drops to remain on top and squeeze out when the top cover is tightened.

vidzapravki

Generally Zeus X MOUTH consists of 6 parts: the dome and inside another dome, top cap, tightening adjustment ring, deck and glass.

vrazbore

disassembled parts of the atomizer

The inner part of the cap has a sealing gasket made of silicone for sealing, as well as a key for connection to the shaft.

vicap

The top cap is connected to the mine and this is one thing in this tank. A small shaft is inserted inside the shaft, which has holes through which airflow will occur. In general, here the air is first taken from above at an angle through a pair of openings of the cap, then the air moves downward and starts blowing the spirals through the pinholes. Such a realization of air intake, allowed to realize 3 D airflow, i.e. immediately from three sides, and this is perfectly reflected not only in the amount of steam, but also in the taste, which is very clearly revealed here.

vidobduv

vidkupolka vidkuppla

Then you can talk about the deck. The base is slightly raised above the deck, i.e. here is the same implementation as in GTA, which means there should be no problems when installing a fleece. In the two racks from the side there are slotted screws that will attract the legs of the spirals.

vidnabazu

vidnadeku

Two protruding sides can be seen at the base, which will hold the small dome and prevent it from shifting when winding up the large dome with glass. At the very bottom of the pin, which is gilded and quite prominent.

nizpina

Installing spirals and laying cotton wool

The installation of the spirals here is vertical and this process does not cause any discomfort. If you have a useful tool like the Trimming Tool, then it’s best to keep within 4.5 mm of the leg of the helix. If you do not like the slotted screws, as sometimes it still happens that the screwdriver flies at the time of tightening and you can get hurt, that is, the screws for the hexagon and the key are a poker to help you.

bild

After the screws in the grooves are tightened and the spirals are centered, it’s time to burn them in order to get rid of the dirt that accumulates on them.

vidspirali

Since here the GTA system, the amount of the fleece needs to be measured such that its tips simply fall down through the special grooves in the deck and down the bath.

vidhlopka

When laying a fleece, problems should not arise; after it has been laid, remove the hairs in the place where the thread is, in order to avoid biting at the time of assembling the Zeus X.

After wetting the fleece, assembling the atomizer and refueling, it’s time to talk about taste and impressions.

Here’s how the atom looks on Drag mini .

vidnamodika

Impressions of use

I really liked the tank, firstly it wasn’t spillage – the slurry wouldn’t go up, secondly, it was a quick refill, the lid was removed very quickly and refilling was done, even with bottles with large nozzles.

About the taste, it can be said that here it is simply revealed perfectly, especially on berry liquids, very tasty. On the installation of cotton wool and how to lay cotton wool – in general there are no questions, everything is simple and clear. Vatu sometimes, depending on the used slurry, can be combed, removed too much.

Cons and pros

Minuses:

– it was not noticed,

Pros:

– workmanship, threads do not crunch, all parts fit well,

– quick refilling, in half a turn,

-just install two spirals and with the installation of a fleece there are also no problems,

– implementation of non-spill,

– decent taste, very bright colors when opening your liquid,

– compact tank size with a large volume.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: GeekVape Zeus X RTA
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Smok Novo 2 Pod System Kit

Vladdin Eden Vape Pod System Kit

Voopoo Drag Nano Kit

Vaporesso Gen TC Box Mod

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

 

 

 

 

ThunderHead Creation Tauren Mech Mod Review

The latest news from Thunderhead Creations.  New mod TAUREN 26mm under (18650/20700/21700)

And hello again, dear vapers and connoisseurs of tasty e-steam. We continue with you to seek out all the most interesting among the vaping devices from manufacturers from around the world. Company Thunderhead Creations we have with you thoroughly examined (designers in the US, manufacturing in China) and are familiar with their devices, which were very good. Today I want to acquaint you with the latest developments of developers with a mechanical mod, which can work from more productive batteries, but if you are not yet sure about the new formats ( 20,700 and 21,700 ), then it doesn’t matter, you can also use the mod with vape batteries format factor 18 650. The mod stands out for its high-quality design and interesting build, besides, the manufacturer asks not so much for such a mod, we are used to seeing high-quality mechanics for as low as $ 100. But here things are simpler. Okay, let’s get this in order.
The latest news from Thunderhead Creations.  New mod TAUREN 26mm under (18650/20700/21700)

So, comes the mod in a black tube with the logo and the inscription of the manufacturer. Inside the tube you will find the mod itself and the keychain in the shape of a key fob all with the same company logo. There is nothing else inside the box. And wait, forget, in the case you will find an adapter, with which the mod can be used with batteries of 18,650.

The latest news from Thunderhead Creations.  New mod TAUREN 26mm under (18650/20700/21700)

The latest news from Thunderhead Creations.  New mod TAUREN 26mm under (18650/20700/21700)

The mod looks great in any version, of which there are several. The main body material is represented by two materials: copper and brass. The inscription of the name of the mod and the logo flaunt on one side, on the opposite side there is a special notch in the case, this solution of the developers allows the vapers to more reliably fix the mod in the palm so that it does not slip out. The button also has a logo engraving. An inscription reminding us of the manufacturer’s company is also engraved near the connector. Each mode is given a unique serial number, which you will also find engraved on the case. Dimensions: as you have probably understood from the title, the diameter of the mod is 26mm, it narrows to the top of the mod, so the seat is approximately 25mm, atomizers with a 24m diameter will look great in tandem with this mod.

The latest news from Thunderhead Creations.  New mod TAUREN 26mm under (18650/20700/21700)

The latest news from Thunderhead Creations.  New mod TAUREN 26mm under (18650/20700/21700)

The latest news from Thunderhead Creations.  New mod TAUREN 26mm under (18650/20700/21700)

The mod is assembled solidly, the button constructive deserves special attention. If you look closely, you can see that the button is made not flush with the case itself, it is as recessed in the case itself. The button itself has a spring mechanism and as they say with an innovative solution of the use of the ball in the design, but we all know that it is not Thunderhead CreationsWere the first who applied this solution design. The button can be disassembled in a matter of seconds, as there are many small components in it, you will often have to clean it. So now the most important thing, as mentioned in the first paragraph. I talked above about the cost, so this mod that you see in the pictures costs $ 40, as for me, this is quite reasonable price. So those who are interested can already safely order and personally test the mod in practice. All thick and tasty, and may steam arrive with you.

The latest news from Thunderhead Creations.  New mod TAUREN 26mm under (18650/20700/21700)

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: ThunderHead Creation Tauren Mech Mod
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Voopoo Alpha Zip TC Kit

Vladdin Eden Vape Pod System Kit

Voopoo Drag Nano Kit

Smok Novo 2 Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Wismec Reuleaux Tinker 2 TC Box Mod Review

Today we will get acquainted with the new version of the Reuleaux Tinker box mod from the well-known company Wismec .

At the end of last year, the popular Chinese manufacturer Wismec  introduced the Reuleaux Tinker box mod , the case of which was styled as basketball sneakers with rubberized inserts. In addition to the remarkable appearance and good ergonomics, the device had a rather solid performance, but it did not gain much popularity among vapers. The other day, the guys from Wismec  decided to give a second chance to the above name and assigned it to their new development, while not forgetting about some useful home chips. We are glad to introduce you to Reuleaux Tinker 2 .

Some distinctive features of the predecessor are easily guessed in the design of the box mod, but the overall concept has undergone significant changes. So, Reuleaux Tinker 2  has protection against moisture, dust and shock according to the IP67 standard, which should save the user from having to worry about the device. From the available colors you can choose one of four options: Titanium gray, Blue & Purple, Black or Red.

In addition to the metal case with soft touch coating, the back surface of the box-mod has received a textured crocodile skin insert, and such a decision should have the best effect on the comfort of holding it.

Inside the Reuleaux Tinker 2 a familiar and familiar board with the same studied functionality is traditionally installed, and the maximum output power of the device is 200W. Interact with the device is offered using a color display with a diagonal of 0.96 inches. On-site and all sorts of variations in temperature control, and the minimum supported resistance in all modes – 0.05Ω .

The novelty works from two replaceable batteries of format 18650, installed through the bottom spring-loaded cover on a special latch. Reuleaux Tinker 2  also allows you to quickly charge batteries with current up to 2A.

The boxmode will be sold both separately and bundled with an unattended tank called Trough , but in all four colors the atomizer will always be painted black.

Features of  Wismec Reuleaux Tinker 2 :

  • Dimensions: 90mm * 53.5mm * 28.5mm
  • Weight: 200,7g
  • Output power: 1-200W
  • Output voltage: 0.5-8V
  • Power supply: 2 * 18650
  • Operating modes: TC-Ni / TC-Ti / TC-SS / TCR (M1, M2, M3) / VW
  • The supported resistance: 0.05-1.5Ω (TC) /0.05-3.5Ω (VW)
  • Charge current: 2A
  • Protection against moisture, dust, shock

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Wismec Reuleaux Tinker 2 TC Box Mod
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Voopoo Alpha Zip TC Kit

Smok Novo 2 Pod System Kit

Voopoo Drag Nano Kit

Vladdin Eden Vape Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

VapeMons Gear 222W TC Box Mod Review

Surely the Vapemons brand is unfamiliar to you. So it was with me until recently, but less than six months from the moment of our acquaintance, their novelty crawled to me, which now you can’t name. I want to note that this is the flagship boxing mod of the manufacturer, except that you rarely find its products. Nevertheless, we meet, he has a couple of chips. 

Vapemons GEARbox mod Dimensions: 92.5 x 56.5 x 28mm Weight: 151g Case material: stainless steel Power supply: 2 x 18650 Chipset: VM Omni board 4.0 Output power: 5 – 226W Operating mode: POWER, TC (NI200, SS, TI), BYPASS Temperature range: 200 ℉ – 600 ℉ / 100 ℃ – 315 ℃

 
Supported resistance: 0.03 – 5.0Ω (Super Player Mode Only) 
Protection: from low / high resistance, from overheating, from short circuit, from incorrect polarity, from overcharging / overdischarge 
Connector type: steel 510, pin gold-plated, spring-loaded 
Screen / diagonal: yes, 0.96 ” 
Micro-USB port / charging: yes, charging current 0.75A wired, 1.4A wireless 
Color: see photo below Package contents – GEAR box mod mod – USB cable – user manual – docking station for wireless charging

 
 
Our guest looks good – there are original elements, such as control gear and panels with a kind of pattern. I will not say that you have a special pleasure, holding it for the first time in your hands. Yes, it looks interesting – but every now and then there are flaws in the quality of the performance (I’ll tell you about them along the way) and the panels, although the print is rather interesting, they look somehow cheap. Although still if you abstract, the normal mode is average. The landing area of ​​steel, on it the Star of David is engraved, it seems to be the name. It rises a little above the main body, therefore, the atoms do not crawl over it, the paintwork of which, by the way, is very prone to scratches. The maximum aesthetic fit is provided only to atoms 24mm in diameter, despite the greater width.

 
The control gear replaced the plus and minus buttons, as well as the function of hover mode switching on it. The notches on it are spiky, but not too much, the stroke is smooth, stepped. It is quite comfortable to use. It also has a built-in LED indicator. The control panel consists of a metal button with a concave profile and a small display. As for the first, it is convenient in principle, a small move, a loud click. But she is so godlessly dangling in a metal case and, accordingly, jingles that sometimes I don’t even want to take the box mod.

 
 
The display is quite bright, the information provides articulately. But even here it was not without the “podlyany” – in my case it is set crookedly relative to the notch in the body. Therefore, even non-serviceable areas can be seen. I admit that this is an isolated case, but the sediment remained, anyway. Immediately at the base of the control panel you can see the connector for charging batteries, charging through this port is carried out by a small current of 0.75A. Plus, there is the possibility of wireless charging, and there is a docking station for this purpose. It is small – diameter 100mm. There is a connector for the lace and LED display on the perimeter.

 
 
Wireless charging is also not so smooth, basically it gives out about 1.4A, but sometimes it even goes up to 2.2A. Rarely, but it happens that this indicator jumps. I am not particularly an experienced user of wireless charging – perhaps these are its features. In order for the box to be charged, it must be put on the docking station with the butt end of the gear. In general, the feature is convenient and it works. Behind the removable side panel, which is fixed by six magnets and sits securely, almost without play, the compartment for the battery hides. There is a key in its base for easy removal. The contacts are probably gilded and well spring-loaded, however, they are costly to handle the batteries. Ribbon for convenience provided.

 
 
Well, now let’s work on the chipset. As you noticed, it is called Omni board 4.0. I, too, at first was surprised and delighted – after all, it was precisely such people who use Vaporess. However, the joy was short-lived – I did not pay attention to the postscript at the beginning, namely “VM or Vapemons”. So, we probably have our own manufacturer. In general, the functionality is not bad, and its management is decent, but there are flaws in the work.

 
Resistance often jumps and even if only on units of hundredths of an ohm, but somehow it is not particularly pleasant. In terms of output power, it seemed to me, the mod significantly imparts, that is, the actual wattage is less than the displayed value. Plus, the chipset often goes into protection against overheating – the words “too hot”. And on Dripke with Sapra 0.1, this happens literally a field of several puffs from a cold start. And that’s not all – I even achieved this unpleasant inscription by driving a 17W tank to tank, although it took a lot more puffs. Plus, during operation there is a decent heating of the mod in the area of ​​the charging connector. Impressions of use


An interesting box, however, he completely disappointed me – it is understandable, if at least the managing chipset worked without any complaints, it was possible to turn a blind eye to the flaws in the quality of execution. And so there is nothing to say, and the price tag is not to say that it is tempting. And yet I found a couple of cherries even with this – this is an original construct and the possibility of wireless charging. Perhaps I will refrain from recommendations this time. 

Package Included:

1 x Gearbox mod

1 x Wireless charging pad

1 x Warranty Card&User manual

1 x Gift box

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: VapeMons Gear 222W TC Box Mod
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Voopoo Drag 2 Platinum 177W TC Box Mod

Vladdin Eden Vape Pod System Kit

Voopoo Drag Nano Kit

Vaporesso Gen TC Box Mod

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html