KAEES Aladdin MTL RTA Review

The 2nd time in a row we begin with the MTL container – in any way, manufacturers nevertheless took up their heads and sent back to really interesting gadgets. It is especially pleasant for me personally that the MTL sector is replenished. In general, this time the business KAEES endured, which normally does not sin experiments in this sector. Nevertheless, I request you to get familiar – the “eastern” perspective in the issue.

KAEES Aladdin MTL RTA

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

Case material: stainless steel 
Atomizer type: RTA 
Capacity: 2 / 4ml 
Diameter: 22mm 
Height: 53.7mm with drip tip 
Connector: 510, pin is gold-plated 
Weight: unknown 
Color: see photo below 
KAEES Aladdin MTL RTA - MTL with a touch of the East ...
Options
– Aladdin MTL RTA 
– screwdriver 
– spare origins 
– spare screws 
– spare glass 
– user manual 
KAEES Aladdin MTL RTA - MTL with a touch of the East ...

Exterior to match the name – from your hero it blows east, fairy tales, possibly even sweets, and a hookah))) Fine, let’s keep the “sick” dream aside. Instead, we remember that the novelty is included in the novelty with a specific form of the lid. It looks very good and looks like a dome of Persian architecture.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

The drip sort is naturally 510, probably made from metallic – numerous might not such as this. It is very tall, and also the condition at first glance appears pleasant.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

Deal with fifty percent-transform fixation – no danger, satisfying slots has been not shown to us. The ability is tiny, but more than doubled because of the use of complete window money.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

The internal digesting in the dome may well be underneath the cone, the diameter in the shaft is fairly small and this really is good news.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

The deck is fairly simple but possesses its own features.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

The very first of such will be the “incorrect” fixation in the thighs and legs from the spiral wound in a certain direction. Of training course, if you use a mono-primary or even the simplest klepto in, you will have no issues with this.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

An starting in the lower airflow is visible in between the two struts the diameter of the nozzle is unknown. Styling slots are tiny, prevents can be found.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

The airflow realignment includes a traditional construct – a rotary ring without marks inside the base of the tank.In complete, five airflow inlets are supplied – their diameter is .8 / 1. / 1.2 / 1.3 / 1.4 mm, respectively.In add-on, fine-tuning is accessible.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

The pin is gilded and protrudes enough.

KAEES Aladdin MTL RTA - MTL with a touch of the East ...

Price $32.99
KAEES Aladdin MTL RTA - MTL with a touch of the East ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: KAEES Aladdin MTL RTA
Hot Sale Recommendation:

Smok RPM40 Vape Pod System Kit

Damn Vape Diamond MTL RTA

OBS Land Vape Pod System Kit

Eleaf Rotor Sub ohm Tank

Geekvape Aegis X TC Box Mod

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Eleaf Rotor Sub ohm Tank Review

Right here recently, our typical viewers have been considering – they are saying, could it be really that this style for non-solutions has sent back.Perhaps today’s guests could be the solution to your issue – she did not disappear anywhere at all.As you will notice later on, designers even deliver innovations towards the segment.So, additional we are going to talk about a new item for outdated-timers – the company Eleaf, which saw the lighting a few days ago.

Eleaf Rotor Sub Ohm Tank

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Housing substance: stainless metal

Atomizer type: maintenance-free of charge

Evaporators: 0.15 / .2Ω

Ability: 2 / 5.5ml

Diameter: 26mm getting / 28mm on bubble glass

Size: 56mm with drip suggestion

Connector: 510, pin gilded Excess

weight: 66g

Shade: see photograph under

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Options

– Rotor Sub Ohm Reservoir

– replaceable evaporators 2pcs .15 / .2Ω (one pre-set up)

– extra origins

– extra silicone plug

– spare window

– consumer guide

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Our visitor appearance regular, you will see no difference between him along with other brothers in the collection so simple.I did not observe any outstanding characteristics, nibbling the scuff marks in the lid.The measurements are not small – in both elevation and then in thickness, a decent tank.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Colour scheme is not as different as usual, but there are plenty to choose from.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

The drip type 810 is made from plastic, it is situated inside the cover with a child locking mechanism.The starting button is extremely a lot issued from the body.The pit for refueling is regular, the seal is installed slotted kind.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

The capability is little, however the full money window will significantly increase it.Moreover, there are 2 variations of the reservoir – nonetheless, of them with European limitations – you will not locate a magnifying window in it.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Nicely, and move on to the most important event.There are two types of replacement evaporators.We are certainly not interested in the least opposition – the spotlight from the plan is just the second instance.As you will notice, a propeller is built inside of, which is driven by a move.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Based on the developers, this has a good impact on the flavor move, as well as provides speedback safety – security against splashes.Well, what exactly is it – it is actually only necessary to consider, to unfoundedly compliments or even to cherish rather hasty.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

The airflow realignment was carried out in a completely familiar way – a swivel engagement ring on the bottom, massive atmosphere inlets, there are dangers.Probably, this backup will still be felled frantically – a minimum of hints of this are adequate.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Pin is operating decently.

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Value $ 35.99

Eleaf Rotor Sub Ohm Tank - now also a non-service with a propeller ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Eleaf Rotor Sub ohm Tank
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Innokin Adept Starter Kit

Eleaf Rotor Sub ohm Tank

Voopoo Drag Nano Kit

Innokin Jem Vape Pen AIO Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

GeekVape Zeus X RTA Review

GeekVape introduced to the market Zeus X RTAThe novelty is designed for two windings, has an upper air intake, but the lower side blowing of the spirals. In general, the chip of the atom is a double evaporation chamber, the implementation of which, apparently, was strongly reflected in the taste, which is perfectly revealed here.

vidnabak

Equipment

The Sample box has flown to us for review, so the device will go to the final consumer in a different package, since we, for example, did not have a manual. The set has a spare flat Pyrex glass for 3.5 ml, 810 Ultem drip tip, a bag with a cotton fleece in the form of laces and 2 prewound spirals, a ZIP package, where there are a lot of multi-colored o-rings – only 14 pieces, 8 spare screws, of which 4 under the slot and 4 under the Phillips screwdriver, adapter for 510 drip-types, L-shaped key with hexagonal screws, T-shaped screwdriver and the Zeus X tank itself.

vnabore

vidpaketa

naborcik

Information for information

GeekVape Zeus X RTA is made of stainless steel and is presented in 6 colors, comes with two glass options – Bubble Glass is pre-installed at 4.5 ml and straight at 3.5 ml, has top air supply, with the ability to adjust the throttle using a ring, but lateral blowing two spirals through a special dome, while coil blown from the bottom.

Vape Wholesale Supply,Vape Wholesale China – AVE40

cveta

Dimensions:

Height: 47.8 mm (with a drip tip) 
Diameter: 25 mm 
Volume: 3.5 ml / 4.5 ml

vidvruke

Tank overview

Top mounted drip tip low pro, made of dolrin. It has an unusual, let’s say, design, but is good to use. In general, the hero of the review looks very nice in conjunction with GeekVape Aegig mini .

vidnamode

Inside the drip-type is smoothed under the cone, so the drops of condensate will not be collected from above, but immediately flow down.

The second yellow tipka from ultema also has a narrowing towards the center and is pleasant to use.

vidnadrip

Next comes the top cover for refueling atomaizer. It has no threads and previously stood in Zeus RTA and Zeus Dual RTA . Very convenient and fast, just press on top of the top-cap and scroll half a turn and unscrew it. The upper filling has recessed holes that will not allow the liquid drops to remain on top and squeeze out when the top cover is tightened.

vidzapravki

Generally Zeus X MOUTH consists of 6 parts: the dome and inside another dome, top cap, tightening adjustment ring, deck and glass.

vrazbore

disassembled parts of the atomizer

The inner part of the cap has a sealing gasket made of silicone for sealing, as well as a key for connection to the shaft.

vicap

The top cap is connected to the mine and this is one thing in this tank. A small shaft is inserted inside the shaft, which has holes through which airflow will occur. In general, here the air is first taken from above at an angle through a pair of openings of the cap, then the air moves downward and starts blowing the spirals through the pinholes. Such a realization of air intake, allowed to realize 3 D airflow, i.e. immediately from three sides, and this is perfectly reflected not only in the amount of steam, but also in the taste, which is very clearly revealed here.

vidobduv

vidkupolka vidkuppla

Then you can talk about the deck. The base is slightly raised above the deck, i.e. here is the same implementation as in GTA, which means there should be no problems when installing a fleece. In the two racks from the side there are slotted screws that will attract the legs of the spirals.

vidnabazu

vidnadeku

Two protruding sides can be seen at the base, which will hold the small dome and prevent it from shifting when winding up the large dome with glass. At the very bottom of the pin, which is gilded and quite prominent.

nizpina

Installing spirals and laying cotton wool

The installation of the spirals here is vertical and this process does not cause any discomfort. If you have a useful tool like the Trimming Tool, then it’s best to keep within 4.5 mm of the leg of the helix. If you do not like the slotted screws, as sometimes it still happens that the screwdriver flies at the time of tightening and you can get hurt, that is, the screws for the hexagon and the key are a poker to help you.

bild

After the screws in the grooves are tightened and the spirals are centered, it’s time to burn them in order to get rid of the dirt that accumulates on them.

vidspirali

Since here the GTA system, the amount of the fleece needs to be measured such that its tips simply fall down through the special grooves in the deck and down the bath.

vidhlopka

When laying a fleece, problems should not arise; after it has been laid, remove the hairs in the place where the thread is, in order to avoid biting at the time of assembling the Zeus X.

After wetting the fleece, assembling the atomizer and refueling, it’s time to talk about taste and impressions.

Here’s how the atom looks on Drag mini .

vidnamodika

Impressions of use

I really liked the tank, firstly it wasn’t spillage – the slurry wouldn’t go up, secondly, it was a quick refill, the lid was removed very quickly and refilling was done, even with bottles with large nozzles.

About the taste, it can be said that here it is simply revealed perfectly, especially on berry liquids, very tasty. On the installation of cotton wool and how to lay cotton wool – in general there are no questions, everything is simple and clear. Vatu sometimes, depending on the used slurry, can be combed, removed too much.

Cons and pros

Minuses:

– it was not noticed,

Pros:

– workmanship, threads do not crunch, all parts fit well,

– quick refilling, in half a turn,

-just install two spirals and with the installation of a fleece there are also no problems,

– implementation of non-spill,

– decent taste, very bright colors when opening your liquid,

– compact tank size with a large volume.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: GeekVape Zeus X RTA
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Smok Novo 2 Pod System Kit

Vladdin Eden Vape Pod System Kit

Voopoo Drag Nano Kit

Vaporesso Gen TC Box Mod

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits